About Pool Pump Timers

Anyone who has a pool, either it’s indoor, outdoor, in ground or above ground, should know that the pool has a pump and any pool that does not really need to be. The pool pump timers are in many respects the heart of your pool and, in particular, its filtration system. How do pump timers work?

In a typical pool pump, electric power is provided by the motor. This engine rotates in the rotor in the pump housing, which absorbs drainage water (or drains in large tanks), filters through the internal filter of the pump and finally sends fresh water back to the tank. Before the water enters the current pump, it moves through a metal basket with a filter, which is used to take large objects such as sheets or even stones. The basket can then be easily removed and emptied.

While the work of a pool pump timer may sound simple and at some point, it does not matter, the pool pump is in many ways the center, even the heart of the pool. Without one thing, this water does not move from the filter and back to the pool, removing tiny organisms, molds and large objects such as leaves, your pool can quickly turn into the breeding ground for bacteria that can cause illness and disease. Therefore, proper precautions and proper maintenance are vital to ensure not only the continuous operation of the pump but also the entire pool.

Fortunately, taking care of the pool pump is relatively simple. All you need to do is either during the night when you use the pool during the summer or for months when the pool is not in use, you are going to remove it from the designated area and clean it by removing the excess sand that can enter a rotor or engine. If you allow this sand and other debris to accumulate, it may eventually burn the engine, allowing you to replace it.

In addition, it is important to know that one of the main differences between the less expensive and costly pool pumps is the workload. The cheapest pumps are usually more powerful than the most expensive ones. This should not be very important if your pump is well connected from your home, but if the pump motor is too close to your home, you should consider paying extra for a less noisy.

There are many different types of pool pump timers (see: The Pool Advisors Reviews), depending on the type of pool you have. Some of them are designed for pools above the ground, others for the earth. Whether the pool is a slope or a top surface, the key factor in determining which one you buy is the internal engine, especially the heat.

Although you can not think of the power of your pump, it really matters. If you buy an incorrect power source, you will not be able to move the water properly through the filter devices, allowing it to stop and collect bacteria, algae and other unwanted ones. If your unit is overloaded, you may experience the same problems as water that will be flushed next to the water inlet hose and, over time, can cause the same concerns as simply stagnant water.